How to Find 6.0 Powerstroke Sensor Locations? Full Details

Facing problems with a 6.0 Powerstroke engine is nothing strange. And, in most cases, the issues with the engine, no matter what car you have, occur due to problems with sensors. So, it’s always crucial to know about the 6.0 Powerstroke sensor locations.

The 6.0 Powerstroke comes with a variety of sensors. As a result, they are located in different areas of your vehicle. For example, the injector pressure sensor is located on the fuel rail. Besides, you will find the engine coolant temperature sensor on the thermostat housing under the air box.  

This article will show you the location and function of the 6.0 Powerstroke sensors. Knowing this information will help you fix sensor-related issues on your vehicle.

You don’t want to miss this next part, do you?

How to Find 6.0 Powerstroke Sensor Locations

Where Are The 6.0 Powerstroke Sensor Locations?

Sensors on a 6.0 Powerstroke vehicle provide information about various aspects of the car, like oil pressure, temperature, oxygen level, etc., to the PCM or ECM. In addition, the sensors are located in different areas of the vehicle.

All the sensors on the 6.0 Powerstroke are connected to some of the essential components of your vehicle. Therefore, the sensors monitor different readings or data of the connected components when the engine starts. 

1. Intake Manifold Absolute Pressure (MAP) Sensor

Your 6.0 Powerstroke engine vehicle’s intake manifold absolute sensor is connected to the intake manifold. If you closely look around the intake manifold area, you will find the intake manifold absolute pressure sensor attached to it with a vacuum pipe. 

The main job of the intake manifold absolute pressure sensor is to read the pressure or vacuum inside your engine’s intake and send information to the PCM or ECM. 

Furthermore, the manifold absolute pressure (MAP) sensor comes into play when accelerating your car while the throttle plate is open.

2. Engine Coolant Temperature (ECT) Sensor

The 6.0 powerstroke engine coolant temperature sensor is near the thermostat housing or cylinder thermostat. You can see the engine coolant temperature sensor whenever you remove the airbox under your vehicle’s hood. 

One of the most important sensors in your powerstroke 6.0 automobile is the engine coolant temperature sensor. However, the coolant temperature sensor’s leading role is to inform the PCM about the coolant’s temperature in the cooling system. 

The sensor also plays its part in providing idle air control (IAC) position to the ECM of the PCM. Unfortunately, the engine coolant temperature sensor is bad; you will be more likely to face engine overheating issues in your car. 

3. Throttle Position (TP) Sensor

The throttle position sensor is attached to your car’s throttle body. To be more specific, the throttle position sensor is located on the butterfly spindle or your engine shaft. 

You will find your vehicle’s throttle body between the intake manifold and the air cleaner on a 6.0 Powerstroke. 

Measuring the air intake on your vehicle is always important. The throttle position sensor does this comprehensively as it measures how open the throttle valve is. For this, the PCM in your car knows how much air is floating in the engine. 

However, if the throttle position sensor goes bad, you won’t be able to accelerate your car. So, you may realize how crucial the throttle position sensor is. 

4. Vehicle Speed Sensor (VSS)

The vehicle speed sensor is mounted on the vehicle transmission (between wheel and axle) and transfers rotational speed measurement in the analog signal. 

Your 6.0 powerstroke engine’s transmission system’s gears rotate at a specific speed, which is measured by the vehicle speed sensor. Then it sends the signal to your car’s Electronic Control Unit (ECU). Due to this, the ECU comes to know how fast your vehicle is moving. 

If the vehicle speed sensor becomes defective, it can show erratic speed  readings. You may want to know the wrong wheel speed information as a driver. 

5. Fuel Rail Pressure (FRP) Sensor

The fuel rail pressure sensor on the 6.0 Powerstroke engine is located in the middle of the fuel rail system. To locate the fuel rail pressure sensor, you need to open your vehicle’s hood and find the fuel rail system near the intake manifold. 

The Fuel Rail Pressure (FRP) Sensor is another important sensor on the 6.0 Powerstroke. The fuel rail pressure sensor measures the fuel rail system’s fuel pressure. As the sensor is connected to the ECU or PCM of your vehicle, it sends information about the fuel rail pressure to the PCM. 

However, if the fuel rail pressure sensor goes bad, the PCM of your car can’t determine what fuel the engine needs. Therefore, you may face the issue of poor fuel economy and weak engine acceleration. 

6. Oil Temperature Sensor

You will see the oil temperature sensor under the hood of your 6.0 powerstroke powered vehicle. More precisely, it is mounted on your vehicle’s engine cylinder head or block. 

The primary function of the oil temperature sensor in your car is to measure the temperature of the oil in the engine. After measuring the oil temperature, the sensor sends the information to the PCM. 

However, with the help of the oil temperature, you can know the heat of your powerstroke 6.0 engine so that you can take measures to cool it. In addition, if the OTS monitors the engine temperature, it should function properly. 

7. Camshaft Position Sensor

You will find the camshaft position sensor behind the power steering pump underneath your vehicle, on top of the cylinder.  

One of the most important tasks the camshaft position sensor plays is determining the timing of the ignition. Furthermore, the camshaft position sensor is used to relay the exact position of the camshaft to the PCM. 

Therefore, the purpose is to send the PCM with the appropriate cylinder event information. 

The camshaft position sensor in your vehicle goes bad; you will notice the symptoms, like engine idle, poor fuel economy, etc., pretty often. That’s why experts don’t recommend driving your vehicle with a camshaft position sensor failure. 

8. Injector Control Pressure (ICP) Sensor

In most engines, including Powerstroke 6.0, the injector control pressure sensor is situated on the driver’s side injector pump or fuel rail. The primary function of the injector control pressure sensor is to measure the oil-feeding pressure in the injector. 

Any major issue with the control pressure sensor causes the engine to idle, stall, misfire, etc. In most cases, the injector control pressure sensor leaks through the pigtail connector. If this happens, you have to replace the pigtail and the sensor. 

Why Should You Know Sensor Locations?

It makes no difference what vehicle you buy; you may still face some trouble as the day progresses. However, your powerstroke 6.0 vehicle’s sensors help the PCM determine whether every component of your vehicle functions appropriately by monitoring various aspects of your car.

So, without any doubt, the different types of sensors in 6.0 powerstroke play a huge role in ensuring your drive or use of your vehicle smoothly. 

However, in most cases, the sensors on your vehicle may go bad. Therefore, you need to fix them as soon as possible. 

Now, if you don’t know the locations of the sensors, how can you check and fix them? 

On the other hand, if you know where the powerstroke 6.0 engine sensors are located, you can check, repair, or replace them in terms of any need. However, the DTC code verified by the OBD2 scanner is also related to vehicle sensors.

FAQs About 6.0 Powerstroke Sensor Locations

Here, we have put together some of the most frequently asked questions regarding the locations of the 6.0 Powerstroke. We hope you will find the section helpful. 

How Many Sensors Are There On The 6.0 Powerstroke? 

The 6.0 Powerstroke has more than 12-30 types of sensors depending on your vehicle. Among them, the most common types of sensors are vehicle speed, fuel rail pressure, oil temperature, intake manifold pressure, etc. 

Why Are 6.0 Powerstroke Sensors Important? 

Sensors, not only on the 6.0 Powerstroke but also on other car engines, play a decent role in monitoring different parts. Moreover, the sensors send the signal to the PCM of the vehicle, and the PCM then lets you know what is happening in your vehicle.

What Happens If The Sensors On The 6.0 Powerstroke Go Bad?

Your vehicle’s sensors have to function correctly so that the PCM can determine whether everything works fine. However, issues with the sensors cause different types of minor and major problems in your vehicle. Therefore, the PCM can’t detect the information of the vehicle components. 


You have come to know the 6.0 Powerstroke sensor locations. So, the next time the Onboard Diagnostic  (OBD) system of your vehicle defects issues with the sensors, you can quickly fix them.

The sensors may often get defective for some valid reasons. However, once you know their location, you can check and fix them quickly, as the faulty sensors lead to significant damage.

Each sensor in your vehicle is connected to specific components. So, if you know that your vehicle’s sensors cause any issues, you should also check the part to which the sensor is related.

Similar Posts