What Is the Meaning of P058D on Chevy Malibu? Here Are the Fixes

The P058D code on the Chevy Malibu is a problem with the battery sensor module harness. There is a weak or open link here for the code.

The onboard computer receives information from the sensor on the battery’s internal temperature, system voltage, and current to make sure they are within the acceptable working range.

Under the NEG battery terminal connector at the battery is where you’ll find this sensor. This code might be set if the car was just jumpstarted.

Now here I will discuss the code P058D, the reason for this, the symptoms, the problems that it can make, and its fix and fix cost. You may also identify the best and quick way to solve the problem.

What is the Meaning of the P058D Code on Chevy Malibu?

The code P058D can occur for many reasons at any time. Firstly examine the connectors and accompanying wiring harness visually. Then check if the parts are damaged or bent. The machine parts also can be pushed out or corroded connector’s pins.

The Chevy Malibu can automatically detect the code P058D. The voltage, current, and internal temperature of the system are all monitored by the vehicle control module to make sure they are within the acceptable working range.

It also can monitor RAM or ROM memory faults. Then performs necessary internal diagnostics.

I will tell you more about this code and its causes later. Keep reading, you will get the necessary information, and it’s fixed properly. The dissection of code P058D for Chevy Malibu is mentioned below:

• P – Powertrain, and the problem is related to the engine, transmission, and emission systems.
• 0 – Standard OBD2, Standardized error
• 5 – Idle and vehicle speed
• 8D – Specific fault information, a problem with the battery sensor harness

How Severe Is Code P058D on Chevy Malibu?

Even though the code P058D for Chevy Malibu will not damage your car totally or the car will not be broken. You should fix the problem when you find out. The problem is pretty significant.

Your car will show the code P058D whenever the problem arises because the vehicle control module always works and find out the specific problem.

Furthermore, you can detect the problem also by observing some external behaviors. The engine light will be turned on or the service engine will show a warning light.

If you be sure your car has the problem with battery sensor harness problem. I will suggest you do not drive with this problem for so long. Because this problem can be bigger later if you don’t fix the issue. So do a quick response and solve it when you can.

The Causes of Code P058D on Chevy Malibu

Whenever you get a code for your Chevy Malibu, the first challenge is to find out what the code means. There are several websites from where you can get the problem out of the code.

You also can find it in the user manual of the Chevy Malibu. After getting the proper problem you have to find out the reason behind it and then try to solve it.

Chevy Malibu can show the code P058D for many reasons. Here is a list of reasons or causes for what the code is shown:

• Damaged or faulty Battery Sensor Module.
• Loose ring terminal at the negative battery terminal.
• A bad electrical connection of the battery sensor module circuit.
• Fretting of corrosion on female terminal pins in the 4-pin connector.
• Loose splice in harness ground circuit.
• The battery sensor Module harness is open and sorted.
• A defective battery control module.

Some Other Symptoms of the P058D Code on Chevy Malibu

The Chevy Malibu will display a variety of signals of the problem if the code P058D occurs.

The symptoms are usually so insignificant that you might miss them all at once. However, in rare cases, you may notice the following symptoms:

• The engine light turns on all the time.
• Sometimes Stop/Start system doesn’t work.
• The radio screen automatically turns off.
• Auto-start doesn’t work.

The Process of Fixing the P058D Code on the Chevy Malibu

Firstly you need to identify the cause. Then find out a proper solution, which will be easy to solve and cost-efficient.

Check or find out the parts which cause the battery sensor module harness. Then properly diagnose those and find the solution.

Here I am going to discuss some common problem that can cause the problem and shows the code P058D. And then I will suggest you some proper solutions:

1. Inspect the Circuit Orientation and Fix

Sometimes the wiring circuit orientation can be the cause of the code P058D for Chevy Malibu. Bad orientation of wiring can over-voltage and damage the battery sensor. To check whether the Batter sensor is okay or not, these are some symptoms:

• The auto start will not work.
• The engine light will be turned on.
• The radio screen will turn off automatically.

For fixing this, first, inspect the orientation of the grounding ring for circuit 150 to the B110 battery sensor module. If you find contacting the sensor, reposition the terminal away from the sensor and tighten the bolt to 5 Nm.

2. Check and Fix the Ground Resistance of DBIM

Verify the Dual Battery Isolation Module’s (DBIM) G103 ground resistance. Sometimes it can cause the code P058D.

During the test, wiggle the connections between the negative battery terminal and the harness to check for varying resistance levels. If the resistance is more than 0.5 ohms or changes more than 1 ohm, follow the steps below:

• Inspect the ground connections and splice in the harness about 1.5 feet from the connector end
• Replace the module and repair the faulty connection
• Clear codes and recheck

If the resistance is less than 0.5 ohms, replace the battery distribution fuse block and wiring harness connector, clear codes, and then recheck.

3. Replace the Sensor

The Battery Sensor Module is the source of the P058D error code. To determine whether the system voltage, current, and internal battery temperature are within the acceptable working range, this sensor transmits data about them to the vehicle’s onboard computer.

If there is a problem in the charging system, The Chevy Malibu can show this code. Firstly the NEG cable needs to be tight and corrosion-free. The charging system also should be tested if everything looks good.

If the charging system seems okay, there must be a problem with the sensor. The best way to solve this is to change the sensor.

The Fixing Cost of the Chevy Malibu with A P058D Code

For fixing the code P058D different factors play role in calculating the costs. Labor cost is the main factor. The labor cost can vary by changing the country or region.

Also, the cost depends on the parts price that is damaged. The more costly the parts price is the more the cost will be.

Replacing a battery sensor is not very expensive. The parts maybe will cost around $50 to $210, plus labor costs. If you buy a battery cable, you get a battery sensor.

These two come together when you buy. Accurately diagnosing the issue is the most challenging aspect, and it’s not always simple.

The labor cost can also vary depending on different shops or different services. Approximately $75 to $150 per hour might be the charge for the repair of faulty or damaged parts. The cost to diagnose the P058D Chevy Malibu code is one hour of labor.

Should You Operate Your Chevy Malibu with Code P058D?

The answer is hard to tell. Sometimes the engine starts. But most of the time the engine will not start because of this battery sensor problem. So sometimes you cannot drive your vehicle.

Also sometimes you can drive with the code1175. But it is recommended to not drive the car after getting the code. Because there is a chance to get serious damage to the car if you drive it with code P058D.

If you drive even after getting the code P058D, can slowly affect you badly. So, for the future long-term healthy engine, fix the code before driving the car.

Frequently Asked Questions (FAQs)

Now, this is time for the frequently asked question (FAQ) about the code P058D. The questions and answers might give the solutions for all your problems or questions:

Conclusion

I have tried to cover all the problems, causes of the problems, and solutions properly and correctly. I hope you got what you needed to know about the code P058D for your Chevy Malibu. Just follow the steps I have mentioned, and you can solve it easily.

If you still can’t find the solution to your problem, find an experienced and expert repair guy or reputed repair company who will solve it for you.